RQConf_PartnerLoginUrl RQConf_CheckUrl

The Charter of the French language and its regulations govern the consultation of English-language content.

SRM Software Update

Upon activation, the latest version of the SRM software will be automatically installed on a new or used sales recording module (SRM).

We recommend that you install the SRM software updates that we develop. Certain updates are mandatory.

Principal changes further to an SRM software update are listed in the table below.

The fact that your sales recording system (cash register or point-of-sale system) is updated (as is done, for example, when the GST or QST rate changes) does not necessarily mean that your SRM software needs to be updated.

You must use the services of an SRM installer authorized by Revenu Québec to update the SRM software. The transaction data recorded in the SRM cannot be lost by updating the software.

To look up the version number of the software currently installed on your SRM, print out the "Informations générales" report by following the instructions in the SRM User Guide (IN-577-V).

For more information, watch our how-to videos on YouTube (available in French only) on YouTube.

Models AEC 6822 C3 1010 and AEC 6822 C3 1020
Characteristics of the various versions of the SRM software
SRM software version number Nature of the changes Is the update mandatory?

2.00

N/A (original version)

N/A

2.16

This version of the software:

  • gives access to a wider range of SRM-compatible receipt printers
  • expands the range of available IP addresses
  • modifies the test page the SRM generates so you can verify the shape of the barcode that will be printed on your periodic sales summary
  • corrects certain technical issues that may occur if
    • you are required to restart your SRM to reset the display station
    • you are required to restart your SRM to print receipts
    • the barcode on your periodic sales summary is elongated rather than square (see the examples below)

Not mandatory

Compliant barcode Non-compliant barcode
Code à barres conforme Code à barres non conforme

2.19

This version of the software:

  • corrects a problem that makes the SRM unable to produce the periodic sales summary.
  • sends messages that are printed by the printer when the SRM's memory is almost full. The message also appears on the display station to inform you that you must free up space in the SRM's memory. You can do this yourself, but only after you make a backup copy of the SRM data on a USB key. 
  • gives your installer another way to put the SRM in installation mode using the display station (installation mode allows the SRM and the ActiMEV software used by the installer to communicate).

If your SRM is accidentally set to installation mode, briefly push the on/off switch and restart the device. The SRM will then be operational.

Not mandatory

Model AEC 6822 C3 1030
Characteristics of the various versions of the SRM software
SRM software version number Nature of the changes Is the update mandatory?

6.00

N/A (original version)

N/A

Note End of note
Veuillez patienter